Filter
Top Products
3. Connections
3.3 Switching to standby.
How to switch to standby?
1. Press STANDBY for 2 sec onds until the mes sages Saving data please wait is displayed. (image 4-5)
Note: Do not press a ny longer on the STAND BY key otherwise the project or will rest art .
Image 3-4
When switching to s tandby, it is possible to restart w ithin the first 5sec.. Wh en not restarted within these first
5 sec., the projector waits for 1 m in. to restart again. During this period the LED display will show a jumping
square with a dash. After one minute, two d ashes will be displayed an d the projector can restart.
3.4 Switching off
How to switch off the projector?
To switch off the projector, handle as follow :
1. Press STANDBY key for 2 seconds. When the message Sav ing data, pleas e wait
is displayed, do not press any longer on the
STANDBY key otherwise the projector will r estart.
Warning: Let cool down the projector at least 10 min.
2. Switch off the projector with the power switch.
3.5 Input Source connection
3.5.1 Input facilities
Overview input facilities
• 5-cable input
• Computer
• Video
• S-Video
• Serial digital input
• IEEE 1394 input (optional)
Input selection
This can be manually or automatically.
When ’automatic’ is selected in the Input slots menu, by starting up the projector, it searches for an input source by scanning the
inputs one by one. If only one source is found, this source will be projected. If different sources are found, the priority is as follow
1. Video
2. S-Video
3. 5 cable input
4. Computer input
SDI and IEEE input are never automatically selected.
When a RCVDS is connected to the p rojector, the ’Automatic’ selection is disabled.
R5976182 BARCOREALITY 6500 30012001 19