Filter
Top Products
C. Source Numbers 81 — 86 and 91 — 96
C. SOURCE NUMBERS 81 — 86 AND 91 — 96
C.1 Projector without any 800 peripheral connected
Overview
The source numbers 81 - 86 and 91 - 96 do not c orrespond to phy sical inputs. An additional adjustment file can be created for these
source num bers. This file can contain different settings. The relationship between sources 1 - 6 and 91 - 96 or between 1 - 6 and
81 - 86 is shown in the diagram below.
Source input 1 source number 1
source num ber 81
source num ber 91
file A
file A’
file A”
Source input 2 source number 2
source num ber 82
source num ber 92
file B
file B’
file B”
Source input 3 source number 3
source num ber 83
source num ber 93
file C
file C’
file C”
...
Source input 6 source number 6
source num ber 86
source num ber 96
file F
file F’
file F”
How to create a second source?
Follow the steps below to create a second or a third file for sources 1 to 6 :
1. Select the source between 1 and 6.
2. Select the corresponding source number between 81 and 86 or 91 and 96 with the digit keys on the RCU.
3. Enter the adjustment mode and load a corresponding file. Ed it this file if necessary.
4. Save the file and exit the adjustment mode.
C.2 Projector with a 800 peripheral connected
Overview
• Source numbers 91 — 96
• Source numbers 81 — 86
C.2.1 Source numbers 91 — 96
Overview
The source number
s 91 - 99 do not correspond to physical inputs. An additional adjustment file can be created for t hese source
numbers (source numb ers of the 800 peripheral). This file can c ontain different settings. The relationship between sources 1 - 9 of
the 800 peripheral and 91 - 99 is shown in the diagram below.
source input 1 source input 1
source input 91
file A
file A’
source input 2 source input 2
source input 92
file B
file B’
R5976182 BARCOREALITY 6500 30012001
111