Filter
Top Products
Chapter 8 Control Software/Software Monitoring
Daylight Display Systems 122 BARCO DLite Software
8.6.AEC Sensing
Introduction
This tab only appears when an Ambient Environment Controller is implemented in the hardware and
configured in the Dlite Software. In <Monitor Properties> , one can select the <AEC Sensing> checkbutton to
let the software read the measurements from the AEC.
AEC SENSING PROPERTIES
<Reaction Slope> sets the characteristic of a filter on the measured values. A value of 1 means immediate
interaction, where a lower value means a filtered reaction. The lower the value, the slower reaction ...
Example
An example of a reaction (slope 0.3) which flattens the peek that occurred ...