Filter
Top Products
Chapter 3 Getting Started
Daylight Display Systems 16 BARCO DLite Software
RGB, SDI and PC Data.
Its the Daylight Display Digitizer that processes all source signals for digital distribution to every DLite display
tile. The Digitizer can be accessed directly or via the DLite Display Control Software. This software is
designed as a user interface to be used with the Daylight Display Digitizer and the DLite Display and can be
used when connected to the Digitizer through a serial RS232 connection.
Getting Started with the DLite Display System
To get started with the DLite Display System act do as follows
1. MAKE SURE...
· To have the software installed properly
· To have made the proper connections between Display & Digitizer and between Digitizer & Controlling PC
2. ACCESS FROM THE TASKBAR
When one starts up the DLite software for the first time, an icon appears in the taskbar.
This icon represents the DLite Software being resident in the Taskbar.
The DLite System Control Software Dialog also appears simultaneously.
Setting up a DLite Display Configuration and controlling the entire system is always done from the box shown
above. However, when one closes this box, this doesnt close down the software because it remains resident
in the taskbar.