Filter
Top Products
Chapter 6 Control Software/Source Control
Daylight Display Systems 79 BARCO DLite Software
LUMA TRACKING
Adjustable from -15 to 0 with the corresponding slider
Luma Tracking prevent that green haze appears in low lights.
CLIP TO SUBBLACK
Adjustable from -15 to 0 with the corresponding slider
Clip To Subblack will filter spurious LSBs in low lights under black-level, to prevent that spurious pixels appear
in black planes., even after Dynamic Image Stabilization.
DYNAMIC IMAGE STABILIZER
Adjustable from 0 to 7 with the corresponding slider
The DIS causes the image to be more stabilized. In high gain displays like the DLite Display this is very
important. The DIS will filter the video in time, where 0 means nearly filtering in time and 7 very high filtering.
Too high filtering can causes smearing in fast moving video. Therefore the DIS is adjustable to achieve an
optimal compromise. Because of this the DIS will minimize spurious pixels in low lights, makes high contrast
performance possible and cleans up sources of lesser quality for display.
RGB GAMMA
Adjustable: flat/-1/-2/-3
The RGB Gamma provides adjustable gamma curves on R G and B outputs, which causes to reserve a high
relative contrast, also in low lights. RGB gamma is processed in the digitizer.
GENERAL GAMMA
General gamma is a more accurate gamma adjustment, performed in the tiles to reserve a better relative
contrast for the images (video / data ..) and for a more accurate color representation. See · General Gamma
FILMMODE
ON/OFF
Select ON to enable a film logic circuit which recognizes whether the source material was originally film or
video to prevent the creation of motion artifacts.
2.DYNAMIC IMAGE STABILIZER SENSITIVITY
Select the amplitude sensitivity of the DIS
e.g. for low video quality sources choose Luma Low/ Chroma Low for video sources of high quality choose
Luma High/ Chroma High (preferable)
3.DYNAMIC IMAGE STABILIZER FILTER
Select the frequency sensitivity of the DIS
e.g. for low video quality sources choose Luma On/ Chroma On (preferable) for video sources of high quality
choose Luma Off/ Chroma Off
4.VIDEO EQUALIZING
Adjustment of the sharpness impression of the image in three frequency ranges.
Adjust sharpness completely conform own preferences or use predefined preset.
5.COLOR MATRIX
Select Color Matrix:
AUTO
automatic adapted to incoming source, depending on measured raster frequency