Filter
Top Products
Chapter 10 Operation
Daylight Display Systems 134 BARCO DLite Digitizer
NOTICE ON OWNER'S MANUAL
Before operating your equipment please read this manual thoroughly, and retain it for future reference.
Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO service dealers.
OWNERS RECORD:
The part number and serial number are located at the bottom of the equipment. Record these numbers in the spaces provided below.
Refer to them whenever you call upon your BARCO dealer regarding this product.
NOTICE ON SAFETY
Devices are built in accordance with the requirements of the international safety standards IEC 950 and UL 1950, which are the safety
standards of information technology equipment including electrical business equipment.
These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to
protect the user or operator against risk of electric shock and energy hazard, and having access to live parts.
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength,
enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation
fails.
* All the safety and operating instructions should be read before using this unit.
* The safety and operating instructions manual should be retained for future reference.
* All warnings on the equipment and in the documentation manuals should be adhered to.
* All instructions for operating and use of this equipment must be followed precisely.
All current or extended warranties will be made null and void should the product or device be subjected to conditions which are clearly
detrimental to the its normal and proper use. The manufacture reserves the right to refuse repair under warranty should the defect or
malfunction be suspected from want-ful neglect. The purchaser will be made liable for costs incurred in these cases.
ON SAFETY
1. This product should be operated from an AC power source (see chapter Power Up/Down).
Digitizer R9828830 provided with a power cord with CEE 7 plug plus power cord with ANSI 73.11 plug
2. This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the purpose of the grounding-type plug.
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) VIA THE SUPPLIED 3 CONDUCTOR
AC POWER CABLE. (IF THE SUPPLIED POWER CABLE IS NOT THE CORRECT VARIENT, CONSULT YOUR DEALER.)
3. To comply with EMC regulations, use only shielded cables.
4. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
5. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the
extension cord does not exceed the extension cord ampere rating. Also make sure that the total of all products plugged into the wall
outlet does not exceed 15 amperes.
6. Never push objects of any kind into this product through cabinet slots as they may touch dangerous high voltage points or
short out parts that could result in a risk of fire or electrical shock.
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by
qualified service personnel before resuming operations.
7. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will prevent damage to the device due to lightning and AC power-line surges.
NOTICE ON INSTALLATION
1. Do not place this device on an unstable cart, stand, or table. The dervice may fall, causing serious damage to it.
2. Do not use this device near water.
3. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the device and
to protect it fromoverheating, these openings must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This
device should not be placed in a built-in installation or enclosure unless proper ventillation is provided.
4. When using the unit in a multi-unit rack assembly or closed assembly, the ambient temperature inside the assembly may not exceed
the maximum rated ambient temperature of the Digitizer. The installation should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
5. When installed in a rack, the mounting should be such that no hazardous condition is achieved due to uneven mechanical loading.
6. When the mains switch located on the back of the digitizer is not accessible due to rack mounting, the socket outlet supplying the
rack shall be installed near the equipment and be easily accessible or a readily accessible disconnect device shall be incorporated in
the fixed wiring. When using a rack in an installation is is advisable to log the serial number of the device and to activate the warranty
figure by registering utilising the included form.
Part number:
Serial number: