Filter
Top Products
Chapter 6 Control Software/Source Control
Daylight Display Systems 69 BARCO DLite Software
3.Edit a user Defined source
Click the EDIT-button to enter the following screen
SOURCE PROPERTIES
In Source Properties one can change the Source Name and Input Relation
DIGITAL CONTRAST
In Digital Contrast, adjust the slider to adjust the Digital Contrast.
Changing the values (color related) and clicking <Update> will adjust the Digital Contrast relative to the values
you typed in .The Digital Contrast value is linked with the Light Output value in the Light Output tab.
LIGHT OUTPUT
In the Light Output tab you can directly change the light output of the Daylight Display. The Digital Contrast
value will change accordingly.
FLICKER ADJUSTMENT
In Flicker Adjustment one can manipulate the flicker by changing the Clock. If one pushes <Restore Clock>,
the Clock Setting will be recalculated to match the best Clock Setting for the selected source.
DLITE DISPLAY PROPERTIES
In DLite Display Properties Change the H start & V start position of the video, the upper left tile will take as the
start position of his source input. Push <Update Position>.
Upscale the output by lowering the resolution of the tile (H Res & V Res). (Automatically limited, see comment
with Scaling)
SUGGESTIONS
Only upscale when you need a resolution higher than 800 x 600
Set the Digitizer to FULL Scale