Filter
Top Products
Chapter 4 Control Software/Setup
Daylight Display Systems 29 BARCO DLite Software
4.DISPLAY ACTIONS
Downloads information about the tiles in the actual display.
DOWNLOAD TILE CONFIGURATION
Downloads the Tile Configuration, i.e. the correction data for each quadrant, the chroma measurement data
and general info for each tile separately. The actual Configuration File (the file seen in the DLite Display
Configuration File window) will be overwritten with this information. To store this information on disk, follow the
instructions to save a configuration file to disk.
DOWNLOAD TILE DATABASE
Download the Tile Database, which stores the Correction Data for every single LED of a tile. This information
is stored in a file for each tile separately which is linked to the tiles serial number. One can manipulate this
database afterwards in the DATABASE MANAGEMENT of the DLite SYSTEM CONTROL.
The progress of the downloading is displayed in the DLite Display Progress Info window. When done, scroll
through it using of the scrollbar or save the log by opening a popup menu with the right mouse button.
5.DISPLAY RESOLUTION INFORMATION
This shows the possible Resolution Modes and which Resolution Mode is active. The active resolution mode
is colored blue. The DLite Display is identified in gray.
6.DISPLAY PROGRESS INFORMATION
Shows the progress of the communication when executing an action. Afterwards one can scroll through it by
use of the scrollbar.
By clicking the right mouse button the following popup menu appears
<Save Log> saves the log to a file
<Print Log> prints