Filter
Top Products
Chapter 5 Control Software/System Control
Daylight Display Systems 49 BARCO DLite Software
5.6.Configuration
(Click the CONFIGURATION-icon)
Overview of the configuration of the whole DLite Display. The most important information of each tile separately
is displayed and its easy to switch from one tile to another.
1.QUICK TILE VIEW
Overview of one tile. Switch to another tile by use of the arrows of the TOGGLE CURRENT TILE VIEW in the
OPTIONS box.
POSITION
The actual positioning: the horizontal and vertical start position (upper left corner) and the horizontal and vertical
end position (the lower right corner).
GENERAL
The tile its serial number and its actual address.
Version of embedded software (SOFT ID) and firmware (FIRMWARE ID) its using.
Mode (internal or external) the tile is working in.
PICTURE
The analog contrast values and an overview of the chroma correction data. These correction data are used to
adjust the slight color-differences between the four quadrants of a tile. For each quadrant and for each color one
can see the temporary and the definitive correction data. The temporary data values are the ones that will be
lost when turning of the tile, the definitive ones are the ones that are stored.