Filter
Top Products
Parameter:
Delpvc: See 8.2.10.1
Pfilter: See 8.2.10.2
Setpvc: See 8.2.10.3
Setqos: See 8.2.10.4
Setspan: See 8.2.10.5
Show: See 8.2.10.6
8.2.10.1 Delpvc command
The delpvc allows to delete one or all PVCs.
> r1483> delpvc all
> r1483>
Command format: delpvc <all>|[<vpi>/]<vci>
Parameter:
All: Deletes all PVCs.
VPI/VCI: Deletes a PVC with a VPI/VCI number.
8.2.10.2 Pfilter command
The pfilter command sets the packet filter for the mentioned PVC.
> r1483> pfilter 8/35 ip
> r1483>
Command format: pfilter [<vpi>/]<vci> <any|ip|pppoe|igmp|none>
Parameter:
VPI/VCI: Sets PVC with the VPI/VCI number.
Any: This PVC passes any packet.
Ip: This PVC passes only IP packet.
Pppoe: This PVC passes only PPPoE packet.
Igmp: This PVC passes only IGMP packet.
None: This PVC does not pass packets.
Note! The pfilter command changes the PVC parameters, first configured by the quick
command (see 8.2.9) or setpvc command (see 8.2.10.3). If the mentioned PVC is not
found, the system displays an error message.
8.2.10.3 Setpvc command
The setpvc command activates PVC with a mentioned address.
Version: 1.0 Page. 55 of 95