Filter
Top Products
8.2.13.5 Fix command
The fix command sets the manual mode of line rate adjustment.
> shdsl> fix 768
> shdsl>
Command format: fix <rate>
Parameter:
rate: Displays the rate at which the connection
will be established. Rate is calculated
according to the following expression
n*64+i*8+8, where n is efficient capacity (1≤
n <36), and i is a header (i=0 | 1). Rate can
take the following values: 2320, 2312, 2256,
2248, 2192, 2184, 2128, 2120, 2064, 2056,
2000, 1992, 1936, 1928, 1872, 1864, 1808,
1800, 1744, 1736, 1680, 1672, 1616, 1608,
1552, 1544, 1488, 1480, 1424, 1416, 1360,
1352, 1296, 1288, 1232, 1224, 1168, 1160,
1104, 1096, 1040, 1032, 976, 968, 912, 904,
848, 840, 784, 776, 720, 712, 656, 648, 592,
584, 528, 520, 464, 456, 400, 392, 336, 328,
272, 264, 208, 200, 144, 136, 80, 72
Note! The fixed mode must be enabled on the master device.
8.2.13.6 Adapt command
The adapt command sets the automatic mode of line rate adjustment.
> shdsl> adapt 2320 72
> shdsl>
Command format: adapt <maxrate> <minrate>
Parameter:
Maxrate: Displays the maximal rate of the connection.
Minrate: Displays the minimal rate of the connection.
Version: 1.0 Page. 60 of 95