Filter
Top Products
8.3.10.7 Setrip command
The setrip command sets the RIP type for the active connection of PPP over ATM.
> pppoa> setrip 1
> pppoa>
Command format: setrip <1|2|1&2|0>
Parameter:
1: Sets RIP1.
2: Sets RIP2.
1&2: Sets RIP1 и 2.
0: RIP is not used.
8.3.10.8 Show command
The show command displays the configuration of the current PPP over ATM connection.
> pppoa> show
PPPoA setting:
Function VPI/VCI CLASS RIP UserID/Authentication
PPPoA 8/35 cbr 1 Access/CHAP
LLC=Enable Echo is disabled
> pppoa>
Command format: show
Parameter:
None
8.3.11 Pppoe command
The pppoe command puts the system into the menu of PPP over Ethernet settings.
The menu description will be given in the next version.
Version: 1.0 Page. 73 of 95