Filter
Top Products
> lan>
Command format: dhcpserver <range1 startIP> <range1 endIP> [<range2 startIP>
<range2 endIP>] [<max-lease-time>]
dhcpserver dns <dns ip1> [<dns ip2>]
Parameter:
Range1 startIP: The starting IP address of the first range.
Range1 endIP: The end IP address of the first range.
Range2 startIP: The starting IP address of the second range.
Range2 endIP: The end IP address of the second range.
Max-lease-time: Lease time of the address.
Dns ip1: IP address of the first DNS.
Dns ip2: IP address of the second DNS.
8.3.4.2 Setdhcp command
The setdhcp command activates or deactivates the DHCP server.
> lan> setdhcp disable
DHCP is set to disable.
> lan>
Command format: setdhcp [server|disable]
Parameter:
Server: DHCP server is active.
Disable: DHCP server is not active.
8.3.4.3 Setip command
See 8.2.4.1
8.3.4.4 Show command
The show command displays the configuration of the built-in DHCP server and the Ethernet-
interface address.
lan> show
Ethernet ip: 198.24.67.20
Subnet mask: 255.255.255.0
DHCP current setting : disable.
DHCP ineffective setting : disable.
Version: 1.0 Page. 67 of 95