![](http://pdfasset.owneriq.net/c/27/c279b5c5-2614-4f21-a4e0-cf7b8d855688/c279b5c5-2614-4f21-a4e0-cf7b8d855688-bg3a.png)
Helium Family PP flash boot 6.1.0.25 (22 October 1999)
(c) Copyright BLACK BOX 1999
SDRAM size = 0x800000, type = 0x2
NPnNo
Booting...
System start...
>>
Command format: save
Parameter: none.
Note! The save command restarts the system.
8.2.13 Shdsl command
The shdsl command puts the system into the submenu of the shdsl line.
>> shdsl
> shdsl>
Command format: shdsl [default | enable | terminal <Coe>|<CPe> | annex <a|b> | fix <Rate> |
adapt <maxrate> <minrate> | status]
Parameter:
Default: See 8.2.13.1
Enable: See 8.2.13.2
Terminal: See 8.2.13.3
Annex: See 8.2.13.4
Fix See 8.2.13.5
Adapt: See 8.2.13.6
Status See 8.2.13.7
8.2.13.1 Default command
The default command sets the shdsl default settings.
> shdsl> default
> shdsl>
Command format: default
Parameter: none.
Version: 1.0 Page. 58 of 95