Filter
Top Products
8.2.13.2 Enable command
The enable command activates the last settings of shdsl without them being saved and restarted.
> shdsl> enable
> shdsl>
Command format: enable
Parameter: none.
8.2.13.3 Terminal command
The terminal command sets the device as the master or slave.
> shdsl> terminal coe
> shdsl>
Command format: terminal <Coe>|<CPe>
Parameter:
Coe: The device is configured as master.
Cpe: The device is configured as slave.
Note! When the two modems are connected according to the point-to-point algorithm, one
of the devices must be configured as the master, and the other as the slave.
8.2.13.4 Annex command
The annex command sets the line code type in accordance with ITU-T (G.shdsl).
> shdsl> annex b
> shdsl>
Command format: annex <a|b>
Parameter:
а: Sets the mode most suitable for the USA
and Canada.
b: Sets the mode most suitable for Europe.
Version: 1.0 Page. 59 of 95