Filter
Top Products
8.3.3.5 Show command
The show command displays the IP configuration over ATM.
> ipoa> show
IPoA setting:
FUNCTION VPI/VCI CLASS Wan IP/MaskNum GatewayIP RIP
IPoA 8/35 ubr 216.71.89.12/24 216.71.89.3 0
Command format: show
Definitions:
VPI/VCI: Defines the used PVC with the VPI/VCI
number.
Wanip/MaskNum: IP address/subnet mask
GatewayIP: Gateway IP address.
RIP: The used RIP
8.3.4 Lan command
The lan command puts the system into the menu of local Ethernet interface parameter settings.
>> lan
> lan>
Command format: lan [dhcpserver | setdhcp | setip | show]
Parameter:
Dhcpserver: See 8.3.4.1
Setdhcp: See 8.3.4.2
Setip: See 8.3.4.3
Show: See 8.3.4.4
8.3.4.1 Dhcpserver command
The dhcpserver command sets the operation mode of the in-built DHCP server.
DHCP Mode: Server.
Version: 1.0 Page. 66 of 95