Filter
Top Products
Parameter:
VPI/VCI: Sets PVC with the VPI/VCI number.
UBR: Sets the UBR priority.
CBR: Sets the CBR priority.
VBR: Sets the VBR priority.
VBRNRT: Sets the VBR-NRT priority.
8.3.12.3 Setrip command
The setrip command sets the RIP type for the used PVC.
> pppoa> setrip 1
> pppoa>
Command format: setrip <1|2|1&2|0>
Parameter:
VPI/VCI Sets PVC with the VPI/VCI number
1: Sets RIP1.
2: Sets RIP2.
1&2: Sets RIP1 и 2.
0: RIP is not used.
8.3.12.4 8.3.12.4 Setwanip command
The setwanip command sets the IP address of the SHDSL (WAN) interface for the selected PVC.
> r1483> setwanip 8/35 216.71.89.12
> r1483>
Command format: setwanip [<vpi>/]<vci> <wanip[/<masknum>]> [llc/vcmux]
Parameter:
VPI/VCI: Sets PVC with the VPI/VCI number.
Wanip: Sets the IP address of the device WAN
interface.
Musknum: Sets the mask number.
Llc/vcmux: Sets the encapsulation type according
to RFC1483.
Version: 1.0 Page. 75 of 95