Filter
Top Products
USER’S GUIDE
3-20
! How to use the control panel
When you operate the Menu switches (+&−
−−
−, Set, Back), remember the
following basic steps:
• If you have made no selections in the Menu switch operation for 30
seconds, the LCD changes automatically from the reprint setting menu to
READY. If the LCD shows PAUSE, it will not reset to READY in 30 seconds.
• When you press the Set switch to select a setting, an asterisk appears at
the end of the display for a short time. After that, the display returns to
the previous menu level.
• Pressing the Back switch before you press the Set switch after changing
the status or a number, will return to the next previous menu level with
the original settings unchanged.
• When you input numbers, you can do this by scrolling through the
available setting range or by setting digits one by one. When setting digits
one by one, the blinking digit is the rewritable digit.