Filter
Top Products
CHAPTER 4 OPTIONS
4-47
☛
☛☛
☛ 7.
Use a coin to remove the screw, and then remove the cover as shown in the
illustration
✒ Note
• The removed screw and cover are no longer required.
Fig. 4-77
☛
☛☛
☛ 8.
Return the Paper sensor into the Output tray as shown in the illustration.
Fig. 4-78
☛
☛☛
☛ 9.
Place the Bridge unit on the Output tray and slide the unit along the output
part of the printer.
Fig. 4-79