Filter
Top Products
2-22
✒
✒✒
✒
Note
When you use the Automatic emulation selection, note the following:
• The EPSON or IBM emulation mode priority must be selected, as the
printer cannot distinguish between them. Since the factory setting is the
EPSON emulation mode, you might need to select the IBM emulation
mode with EMULATION menu in SETUP mode by using the Control
panel when you need to use this emulation.
• Try this function with your application software or network server. If the
function does not work properly, select the required emulation mode
manually using the printer panel switches or use emulation selection
commands from your software.