Filter
Top Products
4-52
☛
☛☛
☛ 4.
Insert the Output guide between the Printer and the Bridge unit.
Fig. 4-87
☛
☛☛
☛ 5.
Mount the brackets of the Finisher stand by placing them in the printer and
then push it downwards slightly with catching it on the projection of the
output guide (①).
1
Fig. 4-88
☛
☛☛
☛ 6.
Use a coin to fasten the two screws that secure the Finisher stand to the
Printer.
Fig. 4-89