Filter
Top Products
1-34
✒
✒✒
✒
Note
If envelopes get smudged during printing, set the print density to a higher
value in the QUALITY settings with the panel operation switch for darker
printouts. To adjust the print density setting, see “Control Panel” in Chapter
3.
• Envelope joints that are sealed by the manufacturer should be secure.
• All sides should be properly folded without any wrinkles or creases.
Most envelopes will perform acceptably on your printer. However, some
envelopes will have feeding and print quality problems because of their
construction. A suitable envelope should have edges with a straight, well
creased folds and should not have more than two thickness of paper along
the lead edge. The envelope should lie flat and not have baggy or flimsy
construction. Purchase quality envelopes only from a supplier who
understands that the envelopes will be used in a laser printer. All envelopes
should be tested prior to use to ensure desirable print results.
✒
✒✒
✒
Note
The manufacturer neither warrants nor recommends the use of a particular
envelope because envelope properties are subject to change by the
envelope manufacturer. The entire responsibility for the quality and
performance of the envelope lies with the customer.