Filter
Top Products
4-32
☛
☛☛
☛ 5.
Remove the two screws holding the cover on the right hand side of the
printer using the Allen key and remove the cover.
✒ Note
The two removed screws and the cover are no longer required.
ZAEP510E
Fig. 4-51
☛
☛☛
☛ 6.
Fit the brackets of the holder into the slots in the printer and push downward
slightly.
ZAEP210E
Fig. 4-52
☛
☛☛
☛ 7.
Use the Allen key to fasten the four screws in the order shown in the
illustration (①-④) to secure the holder to the printer.
ZAEP660E
Fig. 4-53