Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–35
If DEVICE is selected,
Display Message Card Operation
FORMAT
DEVICE
Format a new flash memory card, HDD card or
optional HDD.
Exit
Exit to DEVICE OPERATION
When the display shows “FORMAT DEVICE,” press the
Set
button to
format the installed card.
After the printer finishes formatting the card, you must exit to the
“DEVICE OPERATION” menu.
✒
Notes
• When the card is formatted, data that was previously written is erased.
• It takes ten or more seconds to format a 2-Mbyte flash memory card,
HDD card or optional HDD. The larger the capacity of the device, the
longer it takes to format.
When the installed flash memory card, HDD card or optional HDD is
formatted:
With a formatted device installed, the display shows the following menus:
Display Message Card Operation
DEVICE 1
Select Card 1.
DEVICE 2
Select Card 2.
DEVICE 3
Select optional HDD.
After you have selected the card, the display shows the following
messages:
Display Message Flash Operation
EXECUTE DATA
Select the data ID and execute the selected data. This
menu appears only when data has been saved on the card.
DEVICE LIST
Print the contents of the flash memory/ HDD card or the
optional HDD. This menu appears only when something
has been saved in the device.
SAVE
Save received data, macros and fonts.
DELETE
Delete items from the device.