Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–25
The following settings can be made in this mode:
Display Message Page Format Mode
PAPER =LETTER
Set cut sheet paper size to letter, A4, legal,
B5, A5 or executive, or envelope size to JIS
B5, COM10, C5, or DL.
LEFT M = 0C P
Set the left margin at column 0-126 at
10cpi.
RIGHT M = 80C P
Set the right margin at column 10-136 at
10cpi. See “List of Factory Settings” in this
chapter.
TOP M =0.5" P
Set the top margin at a distance from the top
edge of the paper: 0, 0.33 (Non-HP), 0.5
(HP), 1.0, 1.5, or 2.0 inches.
BOTTOM M=0.5" P
Set the bottom margin at a distance from the
bottom edge of the paper: 0, 0.33 (Non-
HP), 0.5 (HP), 1.0, 1.5, or 2.0 inches.
LINES = 60L P
Set the number of lines per page from 5 to
128 lines. See “List of Factory Settings” in
this chapter.
The letter “P” in the display messages indicates that the page orientation
is portrait. The letter “L” is displayed when it is landscape.
Display Message Page Format Mode (Continued)
X OFFSET= 0
Move the print start position (at the upper left corner on pages)
horizontally up to -500 dots to the left or +500 dots to the right
in 300dpi dot unit increments: factory setting = 0.
Y OFFSET= 0
Move the print start position (at the upper left corner on pages)
vertically up to -500 dots downward or +500 dots upward in
300dpi dot increments: factory setting = 0.