Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–53
8. Press the
Set
button to make the displayed selection effective,
then the display shows the font size selection menu.
✒
Note
When you have selected fixed-pitch fonts, you set the font size by the
character pitch (width). When you have selected proportional spacing
fonts, you set the font size in points (height). The display shows “PITCH”
or “POINT” accordingly. The following displays show “PITCH” to
simplify instructions.
9. Press the
▲
or
▼
button until the desired font size
appears on the display.
10. Press the
Set
button to make the displayed selection
effective.
The blinking cursor then moves to the decimal part of the
number.
11. Press the
▲
or
▼
button until the desired decimal number
appears on the display.
12. Press the
Set
button to make the displayed selection
effective.
The display then shows the symbol set selection menu.
13. Press the
Set
button.
When you enter the symbol set setting mode, the display first
shows the current symbol set with an asterisk.
14. Press the
▲
or
▼
button until the desired symbol set appears on
the display.
See “List of Symbol/Character Sets”.
15. Press the
Set
button to make the displayed selection effective.
The display then shows the next menu.
16. Press the
Set
button to start printing the code table of the
selected font, or press the
▲
or
▼
button to skip this menu.
The display shows the exit menu.
17. Press the
Set
button to exit from the setting mode.
The printer returns to the off-line state.