Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–17
Basic Operating Procedures
When you operate the
Mode
button, remember the following basic steps:
1. Press the
Sel
button to take the printer off-line.
2. Press the
Mode
button to enter the MODE menus.
• Press the
▲
or
▼
button to scroll forward or backward through
the menus. (Pressing the
Mode
button allows you to scroll
forward.)
INTERFACE MODE ←
▼
or
▲
→ FORMAT MODE
←
▼
or
▲
→ RESOLUTION MODE ←
▼
or
▲
→ …
• Press the
Set
button to enter the next lower level of the
selected menu.
Mode Menu Press SET→ Setting Menu Press SET→ Sub-
Setting Menu
• Press the
▲
or
▼
button to select the setting on the display.
I/F=PARALLEL ←
▼
or
▲
→ I/F=RS-232C ←
▼
or
▲
→
I/F=OPTION ←
▼
or
▲
→ …
• Press the
Set
button to make the selected setting effective.
When you see “exit” and press the
Set
button, you can exit
from the current menu to the next higher level of
the menu.
3. Advance to “exit MODE” and press the
Set
button to exit from
the mode menus to the off-line ready state.
Pressing the
Sel
button any time while in any menu level allows
you to exit from the menus mode to the on-line state. The
selections you made with the
Set
button before exiting are now
effective.