Filter
Top Products
USER’S GUIDE
4–6
BUTTONS IN NORMAL MODE
You can control the basic printer operations and change various printer
settings in the NORMAL mode. Functions available in the NORMAL
mode are shown above the panel buttons.
Copy Pages Orientation Feeder
Emulation Mode K YMCToner
Ready
Alarm
Mode
Continue
Font
Set
On Line Data
Sel Form Feed
Fig. 4-3 Buttons in NORMAL Mode
✒
Note
The factory settings are printed in bold in this section.
SEL Button
Pressing the
Sel
button toggles the printer mode between on-line and off-
line. When the printer is on-line, the
On Line
LED lights are illuminated
and the printer is ready to receive data from the computer. When the
printer is off-line, the
On Line
LED is off.
To receive data from the computer, place the printer on-line. To operate
the control panel buttons, take the printer off-line.
If you press the
Sel
button when the printer is on-line, it takes the printer
off-line and the LCD displays the current emulation.
You can enter other emulations in the
AUTO emulation mode by
pressing the
▲
(UP) or
▼
(DOWN) button.