Filter
Top Products
USER’S GUIDE
2–4
SETTING UP THE PRINTER
Remove the Protective Parts
After checking that you have all of the correct parts, temporarily place the
printer where you can easily reach all sides. Remove the protective parts
that secure the printer against damage during transportation, as shown
below:
✒ Important Note
It is CRITICAL that you save all packing materials in the event you must
ship or store the printer. Failure to empty, clean and correctly repack the
printer according to the manufacturer’s instructions BEFORE shipment
will result in serious damage to the printer. This damage may not be
covered by your warranty.
1. Remove the protective parts as shown below.
Fig. 2-4 Removing the Protective Parts