Filter
Top Products
CHAPTER 2 SETTING UP THE PRINTER
2–19
Turning the Printer On
Installing the Power Cord and Turning the Printer On
1. Make sure that the
Power
button is turned OFF. The power
button is on the front left side of the printer.
2. Attach the power cord to the printer and plug it into an
appropriate AC outlet.
Fig. 2-25 Plugging in the Power Cord
3. Turn the printer ON by pressing the
Power
Button.
!
Caution
•
Check the AC voltage. This printer should be operated at the specified
voltage and frequency.
• USA and Canada: AC 120 V, 50/60 Hz
• Europe, Australia and others: AC 220 to 240 V, 50/60 Hz
•
Since this printer must be electrically grounded, the power cord
should be connected to a grounded AC outlet.
•
The total length of the power cord, including extension cords, should
not exceed 5 metres (16.4 feet). Use of a longer power cord may result
in reduced voltage or malfunctions.
•
Do not unplug the power cord to turn off the printer.
•
The printer should be installed near a power outlet that is easily
accessible.