Filter
Top Products
Configuring Frame Relay Ports 5-3
Frame Relay Status and Configuration
Figure 5-1. Frame Relay Port ConÞguration
The Frame Relay ConÞguration window provides the following information:
Max Bytes per Frame
This Þeld speciÞes the size (in bytes) of the largest frame that can be transmitted
across the port. This value is determined by your frame relay service provider.
Line Speed
This Þeld speciÞes the data transmission rate in bits per second. If this port is a
physical DTE, specify the line speed that matches the speed of the device
connected directly to the port. If the port is a physical DCE (i.e., the attached I/O
cable is DCE) specify the clock speed of the serial port you are conÞguring.