Filter
Top Products
CHAPTER 1 GENERAL DESCRIPTION
5) The scanned image is displayed on the
screen. Once you have finished, click the
[Next step] button.
Figure 1-310
6) The output settings are displayed.
Configure the settings and click the
buttons as needed.
Note: The button names vary depending on
the output method.
Figure 1-311
7) When the output is complete, the finished
screen is displayed.
Figure 1-312
Reference: Scanner Settings Screen
You can display the settings on the
screen by setting [Scans in the full auto
mode: OFF] in the step 3. You can then
open the advanced settings dialog box
by setting [Use advanced settings dialog
box: ON] and clicking the button on the
right.
Figure 1-313
Figure 1-314
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
1-9