Filter
Top Products
CHAPTER 3 DISASSEMBLY & REASSEMBLY
2. Main Motor 4) Remove the belt
{
1
and gears
{
2
.
1) Remove the control PCB (with mounting
plate).
(Page 3-4)
2) Remove the main motor cable
{
1
from
the cable holder, and remove it from the
base unit.
Figure 3-207
Notes on assembling
Align the edge
{
1
of the gear shaft with
the hole in the base, and mount the
motor while inserting the position setting
pin
{
3
into the hole in the mounting
plate so that the two edges
{
2
of the
grounding plate touch the inside of the
motor mounting plate.
Figure 3-205
3) Remove the 2 screws
{
1
(M3,
self-tapping), and then remove the main
motor
{
2
(with belt).
Do not get the cables caught in parts.
Figure 3-208
Figure 3-206
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
3-5