Filter
Top Products
CHAPTER 3 DISASSEMBLY & REASSEMBLY
I. EXTERNAL PARTS
1. Upper Cover
1) Stand up the main body, insert a tool into
the 2 holes
{
1
on the left and right side
of the bottom cover, and slightly lift up
the front side of the upper cover
{
2
to
unhook the fitting parts.
Figure 3-101
2) Return the main body to horizontal and
open the straight path tray
{
1
. Unhook
the 2 pairs of fitting parts
{
2
on the left
and right side and remove the upper
cover
{
3
. Take care because there is a
cable connected to the back of the
control panel. Then, remove the
connector
{
4
.
Figure 3-102
Figure 3-103
Notes on assembling
Connect the cable before attaching the
upper cover. Do not get the cables
caught in parts. Furthermore, align the
position with the rear side bottom cover.
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
3-1