Filter
Top Products
CHAPTER 4 INSTALLATION & MAINTENANCE
5. Connecting to a Computer 6. Power On
Note: Always use the power cord and AC
adapter supplied with the machine.
Press the power button. The power
button lights when the power turns ON.
1) Connect the power cord to the AC
adapter.
Power button
2) Insert the plug from the AC adapter into
the connector on the main body, and
connect the power cord to the outlet.
3) Check that the power switch of the
machine is off. Of the power is on, turn it
off.
Figure 4-106
4) Connect the machine and the computer
using the included USB cable.
When you turn this machine connected
to the computer ON, the plug-and-play
function recognizes this machine, and the
device driver is automatically installed.
The preparation is now complete. Check
whether scanning is really performed. Refer
to the “User Manual” for the details.
Figure 4-105
Note: To turn the power OFF, hold down the
power button until the light goes off.
COPYRIGHT
©
C
ANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
4-3