Filter
Top Products
CHAPTER 4 INSTALLATION & MAINTENANCE
3) Replace Rollers Display
Once the number of sheets fed exceeds
the guide for replacement of 200,000
sheets, a screen displaying the
message [Replace Rollers] is displayed
the next time the computer recognizes
the machine.
Figure 4-303
4) Method for Replacing Rollers
Roller unit
Move the lever and remove the roller
unit. Then assemble the new roller unit
by aligning the fitting parts on the right
side and lock into place using the lever.
Figure 4-304
Figure 4-305
Figure 4-306
Retard roller
Open the roller cover and remove
the
roller by pulling the lever. Then
assemble the new roller by aligning the
fitting parts on the right side.
Figure 4-307
Figure 4-308
5) Resetting after replacement
The counters need to be reset after
replacing the rollers. The following
shows the method for doing this.
Start Windows, and login with
administrator privileges.
•
•
•
Click the [Start] button on the computer,
and then click [All Programs], [Canon
DR-M140], and [Canon imageFORMULA
Utility] in order.
The [Canon imageFORMULA Utility]
starts, and the screen is displayed.
COPYRIGHT
©
C
ANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
4-7