Filter
Top Products
CHAPTER 5 TROUBLESHOOTING
6. Firm Load
Firmware is changed in this mode. For
details, refer to service information provided
when firmware is changed. Do not use this
mode by mistake.
The same functionality as this mode is
also available in “E. Firm Load”.
Operation Procedure
1) Select [Firm Load] from the main menu
screen.
2) The screen is displayed requiring the file
in which software is stored to be
selected.
3) Select and open the file.
4) It is loaded automatically and a progress
screen is displayed.
Figure 5-223
5) When finished, the progress screen
disappears and the main menu screen
returns.
When the firmware is changed, a reset is
automatically executed internally.
6) Check that the version displayed on the
main menu screen is correct.
Figure 5-224
Note: Do not turn the power OFF including
the USB cable is removed during
loading. If the power is turned OFF, it
returns to its original state when
restarted, but this is not guaranteed.
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
5-15