Filter
Top Products
CHAPTER 5 TROUBLESHOOTING
Operation Procedure
1) Set the scan modes.
2) Place the document.
3) When the save screen is displayed, set
the save location.
4) The document is scanned.
5) The data is saved and the image is
displayed as well.
If you scanned multiple sheets, the last
document image is displayed. However,
if [Not Save Read Image Data] is
selected, the image is neither saved nor
displayed.
Figure 5-237
6) The completion screen is displayed when
the document ends. Click [OK].
Figure 5-236
Note: If an error occurs in the scan modes,
the following error screen is displayed.
Select [OK] at the top of the screen to
exit the scan. You should restart after
exiting service mode.
Furthermore, if you become unable to
perform operations while using service
mode, you should reset the computer
and scanner.
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
5-23