Filter
Top Products
CHAPTER 5 TROUBLESHOOTING
3. How to Start and Finish
6) The initial screen is displayed.
How to start
1) Start the computer for servicing.
2) If an icon of CaptureOnTouch is
displayed on the task bar, click the icon
to terminate it.
Note: Refer to the “User Manual” for the
details of how to operate
CaptureOnTouch.
3) Connect the USB cable and then turn on
the machine.
Figure 5-206
4) Run the installed file
“DRUnificationTool.exe”.
7) Select [Select Scanner] to run each
service mode, or select [Firm
Registration] to register firmware.
8) If you select [Select Scanner], the
scanner selection screen is displayed to
select the connected scanner.
For DR-M140.DLL only
Figure 5-204
5) Password dialogue box appears, and
enter six characters as “market” and
select [OK].
When there are other DLLs
Figure 5-205
Figure 5-207
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
5-7