Filter
Top Products
CHAPTER 5 TROUBLESHOOTING
33 Firm Load
34 Firmware
version/Note:
Displays and selects the content of registered firmware.
35 Registerd Firm Load Changes the registered firmware.
36 Firm Load Selects and changes unregistered firmware.
37 Check Device Displays the current firmware version.
38 Analog
39 Regist Sensor Operates the registration sensors (pre and post) and
displays data.
40 Door Open Sensor Operates the door sensor and displays data.
41 Double Feed Sensor Operates the ultrasonic sensor and displays data.
42 Document Sensor Operates the document sensor and displays data.
43 Separation Sensor Operates the separation sensor and displays data.
44 Flapper Sensor Operates the flapper sensor and displays data.
45 Skew Sensor Operates the skew sensor and displays data.
46 Extended Setting
47 Regist Manual
Adjustment
Manually adjusts the current registration adjustment
value.
48 Virtical Scaling Rate
control
Manually adjusts the reduction ratio in the feed
direction.
49 (Scanning Modes) Selects the various scanning parameters.
50 Zoom Enlarges the displayed image.
51 Scan Executes a scan.
52 Regist Adjustment Automatically adjusts the reading start position.
53 Firm Registration
54 Register Registers firmware.
55 Delete Deletes registered firmware.
56 Add Note Adds remarks to the registered firmware.
57 Application information Displays the service tool (EXE file) version.
58 Simulation mode Executes simulated operation without connecting to the
scanner.
Table 5-201b
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION
5-5