CHAPTER 4 INSTALLATION & MAINTENANCE
III. MAINTENANCE
1. User Maintenance
Refer to the “User Manual” for the
details.
1) List [∆:Clean,
: Replace]
Location/Parts
No. No.
As
necessary
200,000
sheets
Details
1 Main body ∆ Use a cloth slightly dampened with water
and well wrung out to remove any dirt, and
then use a clean, dry cloth to wipe the main
body.
2 Reading glass ∆
Use a soft, clean, and dry cloth to wipe off
any dirt.
3 Roller unit ∆
4 Retard roller ∆
5 Other rollers ∆
Use a cloth slightly dampened with water
and well wrung out to remove any dirt, and
then use a clean, dry cloth to wipe the main
body.
Note: Remove the roller unit/retard roller
from the main body before cleaning.
6 Feed path ∆ Use such as air blowers to remove any dust
and paper particles that have accumulated
on the feed path.
Table 4-301
2) Locations to be cleaned
Reading glass •
Reading
glass
Figure 4-301
Roller •
Retard roller
Roller unit
Roller
Figure 4-302
4-6
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION