Filter
Top Products
CHAPTER 1 GENERAL DESCRIPTION
2. Scanning
This section describes how to scan
using [Scan First] in CaptureOnTouch.
Note: CaptureOnTouch is TWAIN
compatible
application software.
1) Start CaptureOnTouch.
Double-click the CaptureOnTouch icon in
the task bar to start CaptureOnTouch.
Figure 1-306
2) When the main screen is displayed, click
[Scan First].
Note: Since [Scan First] is enabled by
default, this operation is not required.
Figure 1-307
3) Change the [Enable continuous
scanning] and [Scans in the full auto
mode] settings as needed.
Note:
In this example, set [Enable continuous
scanning: ON] and [Scans in the full
auto mode: ON].
Figure 1-308
4) Click the Start button to start the scan.
Figure 1-309
1-8
COPYRIGHT
©
CANON ELECTRONICS INC. 2011 CANON DR-M140 FIRST EDITION