Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
5-9Chapter 5 Speed Dialling
Using One-Touch Speed Dialling
Once you have registered your numbers under one-touch speed dialling buttons,
you can use them to send documents as follows:
Be sure to adjust the document feed lever before loading your document. See
page 6-6 for more details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
½ If necessary, you can adjust the resolution and contrast. See page 6-13 for
more details.
2. Press the one-touch speed dialling button assigned to the number to which
you wish to fax.
Ex:
TEL=CANON U.K.
½ The name registered under that one-touch speed dialling button is
displayed. If no name is registered, the number registered under that
button will be displayed.
½ If you mistakenly press the wrong one-touch speed dialling button, press
the STOP button then press the correct button.
½ If no fax number is assigned to the one-touch dialling button you press,
the LCD displays NO TEL #. If this happens, make sure you pressed the
correct button and that the number you want to dial is registered under
that button.
3. Press START/COPY.
½ If you do not press the START/COPY button within five seconds of
pressing the one-touch speed dialling button, the MultiPASS L60 will
begin sending automatically. If you do not want the MultiPASS L60 to
send automatically, you need to change the AUTO START TX setting.
See pages 13-8 and 13-9 for more details.