Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
7-11Chapter 7 Receiving Faxes
Receiving Faxes Automatically: FAX ONLY MODE
When the MultiPASS L60 is set up for a dedicated line, set FAX ONLY MODE
to automatically receive documents whenever a call comes over the fax line.
1. Make sure the MultiPASS L60 is set up to receive over a dedicated fax line.
2. Press RECEIVE MODE to select FAX ONLY MODE.
RECEIVE MODE
FAX ONLY MODE
½ The MultiPASS L60 assumes all incoming calls are from fax machines
sending documents. It receives the documents automatically and
disconnects all voice calls.
½ In FAX ONLY MODE, you can control whether or not the MultiPASS
L60 rings when it receives a fax call. To set this option from the
MultiPASS L60 operation panel, refer to pages 13-10 and 13-11
(INCOMING RING setting). You can also set this option from the
MultiPASS Desktop Manager. See the MultiPASS Desktop Manager
User’s Guide for details. Please note that even if you enable this option,
the MultiPASS L60 will only ring if you have the optional handset
connected to it.