Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
7-13Chapter 7 Receiving Faxes
Documents Received in Memory
The MultiPASS L60 will automatically receive incoming faxes into its memory if
it encounters a problem that prevents it from printing normally. The LCD will
display a message showing the problem. See below for correcting the problem.
The MultiPASS L60 memory can store up to approximately 90 A4-size pages.
Messages Displayed When Documents are Received in
Memory
If the MultiPASS L60 receives a document into its memory, the LCD displays one
of the following messages. These messages show the action you must take to
correct the problem.
CHANGE CARTRIDGE
Cause: The toner cartridge ran out of toner or is not installed properly.
Action: Make sure the cartridge is installed properly, and install a new one if
necessary. See ”Installing/Replacing the Toner Cartridge” on page 2-29.
LOAD PAPER
Cause: The MultiPASS L60 ran out of paper.
Action: Add paper to the multi-purpose tray. See ”Loading Recording Paper”
on page 2-35.
CLEAR PAPER JAM
Cause: A paper jam occurred.
Action: Clear the jam. See ”Paper Jams” on page 11-5.
Once you have corrected the problem, the MultiPASS L60 automatically prints
the documents stored in memory.