Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
4-6 Chapter 4Paper Handling
The Paper Path
Understanding how paper feeds through the MultiPASS L60 will help you to
determine how to load paper and handle paper jams.
The page travels first to the FX-3 toner cartridge. Here a laser beam ”draws” the
print image on the drum, then the drum applies toner to the page. The page then
travels to the fixing assembly where the toner is fused to the page. The page then
exits the unit from the front or top.
DOCUMENT
RECORDING PAPER
(MULTI-PURPOSE TRAY)
RECORDING PAPER
(MANUAL FEED SLOT)
TONER CARTRIDGE
When you are printing, follow these guidelines:
½ Always set the paper delivery selector before starting to print.
½ Do not switch the paper delivery selector until the printout comes out of the
delivery slot completely. Otherwise, a paper jam may occur.
½ Make sure there is enough room for the paper to exit from the face-up
delivery slot.
½ Never pull the paper as it comes out of the unit.
½ When using face-up delivery, let the paper slide onto your open hand or onto
the table as it exits the slot.
½ When using face-up delivery, remove each sheet as it is delivered through the
face-up delivery slot.