Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-33Chapter 11 Frequently Asked Questions
Print Quality Problems
If the print quality is not what you expect it to be, check the problems and
solutions below.
Problem Possible cause Solution
Print is not clear? The medium you are using
may not be supported by the
MultiPASS L60.
Use only print media specified in
”Guidelines for Selecting Print
Media” on page 4-2.
You may be printing on the
wrong side of the paper.
Many types of paper have a
”correct” side for printing. If
your paper does, make sure that
side is facing up. If the paper has
no obvious correct side, try
turning the paper over and
printing on the other side.
The printout has vertical white
streaks?
Toner may be low or be
unevenly distributed.
Follow these steps:
1. Open the front cover and
take out the FX-3 toner
cartridge.
2. Gently rock the cartridge side
to side five or six times to
evenly distribute the toner
inside.
3. Put the cartridge back into
the unit.
4. Close the front cover and try
printing again.
If this does not solve the
problem, replace the FX-3
cartridge.