Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
3-3Chapter 3 Registering Information in the MultiPASS L60
Guidelines for Entering Information Via the
Operation Panel
The following section explains how to enter user information into the MultiPASS
L60 via the operation panel.
½ If you pause while entering information and do not make an entry for more
than 60 seconds, the MultiPASS L60 returns to standby mode and loses all
information you had entered up to that point. You will then have to start
again.
½ If the MultiPASS L60 rings while you are entering information, press the
STOP button and lift the handset: The MultiPASS L60 will automatically save
all the information you have entered up to the last time you pressed the
START/COPY button.
¼ If you hear nothing or a slow beep, someone is trying to send a fax: press
the START/COPY button.
¼ If you hear a voice, you are receiving a normal telephone call.
¼ If your MultiPASS L60 is set to receive faxes automatically, you do not
have to press the STOP button. The MultiPASS L60 will automatically
receive the fax. See Chapter 7 ”Receiving Faxes”.