Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
7-4 Chapter 7Receiving Faxes
Receiving Faxes and Phone Calls Automatically: Fax/Tel
Mode
See page 7-3 to select Fax/Tel Mode.
Set this mode if you want your MultiPASS L60 to automatically switch between
voice and fax calls. For this mode, you need to have the optional handset or a
telephone connected to your unit.
You can control precisely how your MultiPASS L60 handles incoming calls by
adjusting the settings described below.
Setting Up Fax/Tel Mode
When you select Fax/Tel Mode, you can also set the following options.
The options described below can also be set from the MultiPASS Desktop
Manager. See the MultiPASS Desktop Manager User’s Guide for details.
½ RING START TIME
When a call comes in, the unit checks to see if it is a person wishing to speak
to you or a fax machine trying to send a document. If your unit does not have
enough time to detect the fax tone, it assumes the call is from a telephone.
Use the RING START TIME setting to increase the time the unit takes to
check whether a call is from a fax machine or a telephone. You can select a
time between 0 and 30 seconds; the default is 8 seconds.
½ F/T RING TIME
When your unit is set to receive both fax and telephone calls automatically, it
rings to alert you to pick up the handset if the call is from a person. If you do
not pick up the handset within a certain amount of time, the unit stops ringing.
Use this option to change the number of times the unit rings, from 10 to 60
seconds. The default is 22 seconds.