Filter
Top Products
Canon MultiPASS L60 User’s Manual ENGLISH
11-24 Chapter 11Frequently Asked Questions
Receiving Faxes
Problem Possible cause Solution
The MultiPASS L60 cannot
receive faxes automatically?
The MultiPASS L60 may not
be set to receive
automatically.
For the MultiPASS L60 to
receive faxes automatically, it
must be in FAX ONLY MODE,
ANS.MACHINE MODE, or
Fax/Tel Mode. See page 7-3.
The MultiPASS L60 may
have a document in memory,
leaving very little or no
memory available.
Print out any documents stored
in memory. See pages 7-13 and
7-14.
An error may have occurred
during reception.
Check the LCD display for an
error message. See page 11-36
for a listing of the MultiPASS
L60’s error messages.
Print an activity report and look
for an error code. See page 10-2.
The multi-purpose tray may
be empty.
Make sure the multi-purpose
tray has paper in it.
The telephone line may not
be connected properly.
Make sure all telephone line
connections are secure.
The MultiPASS L60 will not
switch between telephone and
fax calls automatically?
The MultiPASS L60 may not
be in Fax/Tel Mode.
For the MultiPASS L60 to switch
automatically between telephone
and fax calls, it must be in Fax/
Tel Mode. See page 7-3.
The MultiPASS L60 may
have a document in memory,
leaving very little or no
memory available.
Print out any documents stored
in memory. See pages 7-13 and
7-14.